Ritter Midmark M7 Speedclave Autoclave, Gen 1, good working condition with 30 day parts and labor warranty

• The refurbished Midmark Ritter M7 Speedclave autoclave has a saftey door, which automatically seals when pressureized and will not allow the operator to open the door until the chamber is safely depressurized.
• The temperature regulator allows the operator to preset the temperature at a desired setting between 250° F (121°C) and 270°F (132°C). This control, acting as a thermostat, cycles the heating element on and off.
• The temperature gauge indicates the temperature inside the chamber. The gauge is graduated in 2-degree increments.
• The unit comes with a low-water cut-out switch, which prevents "dry burning". The M7 will only operate when there is enough water present, which prolongs the life of the heating element. A pilot light is on when the heater is on, and cycles on and off during normal operation.
• A cycle timer regulates sterilization time from 0 to 30 minutes and automatically turns the M7 off when the sterilization cycle is complete. This prevents over-sterilization thus extending the service life of your instruments.

Type: Good Working Autoclaves

• Chamber Size: 7.5" x 15"
• Dimensions (L x W x H): 19" x 14" x 13"
• Trays: 3 (2 large and 1 small)
• Tray Size (L x W x H): Small: 12" x 4-1/8" x 7/8" / Large: 12" x 5-5/8" x 7/8"
• Standard Unwrapped Cycle Time: 3 minutes (does not include heat up or cool down time)
• Voltage: 115V

Good working units may have cosmetic defects and only include 30-day parts and labor warranty.

WARRANTY: 30 Day parts and labor