Sterisil Ac+ System Pure Water for your Autoclave and Instrument Washer
Regular price
$2,980.00
Sale price
Regular price
Shipping calculated at checkout.
Couldn't load pickup availability
Sterisil® Ac+ Autoclave Systems
AFFORDABLE, ON DEMAND AUTOCLAVE WATER AND FINAL RINSE WATER FOR INSTRUMENT WASHERS
The ease of use and confidence that Sterisil has brought to dental unit water line treatment now comes to the world of distilled and deionized water for use with your office’s sterilizers and autoclaves. Each of Sterisil’s Ac series of products produces distilled quality water with 0ppm Total Dissolved Solids (TDS). Sterisil offers two levels of treatment for use with both table-top autoclaves and high-capacity instrument washers. No more wasted space from large water jugs and water coolers, no more purchasing bulky containers and only minutes of maintenance will supply your office with all of its autoclave water needs for up to an entire year!
BUILT FOR CONVENIENCE
• Can be mounted under a sink or on the wall in a sterilization center
• User serviceable without a dental technician
• Audible and visual maintenance notifications
• Water can be delivered via a faucet or the Sterisil® Wand (optional) depending on the practice need
Can be used in areas with very hard water; 150ppm TDS or more
Can produce up to 50 gallons of distilled quality water per day
Produces final rinse water for instrument washers
Full system audible and visual monitoring system notify you of needed cartridge replacement
Ultraviolet (UV) Irradiation for preliminary water treatment
Designed to be used with Sterisil dental water line treatment products
INITIAL SETUP AND BASELINE REQUIREMENTS
For the system to fit functionally in its mounting, it will require at least:
• 20” in length
• 9” in width
• 20” in height
These dimensions allow for 2” of space on all sides of the system.
AFFORDABLE, ON DEMAND AUTOCLAVE WATER AND FINAL RINSE WATER FOR INSTRUMENT WASHERS
The ease of use and confidence that Sterisil has brought to dental unit water line treatment now comes to the world of distilled and deionized water for use with your office’s sterilizers and autoclaves. Each of Sterisil’s Ac series of products produces distilled quality water with 0ppm Total Dissolved Solids (TDS). Sterisil offers two levels of treatment for use with both table-top autoclaves and high-capacity instrument washers. No more wasted space from large water jugs and water coolers, no more purchasing bulky containers and only minutes of maintenance will supply your office with all of its autoclave water needs for up to an entire year!
BUILT FOR CONVENIENCE
• Can be mounted under a sink or on the wall in a sterilization center
• User serviceable without a dental technician
• Audible and visual maintenance notifications
• Water can be delivered via a faucet or the Sterisil® Wand (optional) depending on the practice need
Can be used in areas with very hard water; 150ppm TDS or more
Can produce up to 50 gallons of distilled quality water per day
Produces final rinse water for instrument washers
Full system audible and visual monitoring system notify you of needed cartridge replacement
Ultraviolet (UV) Irradiation for preliminary water treatment
Designed to be used with Sterisil dental water line treatment products
INITIAL SETUP AND BASELINE REQUIREMENTS
For the system to fit functionally in its mounting, it will require at least:
• 20” in length
• 9” in width
• 20” in height
These dimensions allow for 2” of space on all sides of the system.
Limited Warranty: 12 months
Sterisil® warrants the Sterisil® Ac+ System to be free from defects in parts, materials, manufacturing, or labor for a period of one year after the device is placed in service by the end user (the “Warranty Period”), and on select electrical components from the date of Sterisil’s Purchase. This Limited Warranty does not include user replaceable parts required for routine maintenance of the product or damage resulting from abuse or neglect of the product, and covers only use of the product for its intended purpose, and not for any other use. End users should contact Sterisil® or an authorized distributor for claims arising during the Warranty Period. Sterisil® reserves the right to repair or replace, in its discretion, any product that may exhibit a defect during the Warranty Period. Please note that the bladder tanks need to be replaced approximately every 2 years
See page 14 of the Operators Manual for warranty details.
Sterisil® warrants the Sterisil® Ac+ System to be free from defects in parts, materials, manufacturing, or labor for a period of one year after the device is placed in service by the end user (the “Warranty Period”), and on select electrical components from the date of Sterisil’s Purchase. This Limited Warranty does not include user replaceable parts required for routine maintenance of the product or damage resulting from abuse or neglect of the product, and covers only use of the product for its intended purpose, and not for any other use. End users should contact Sterisil® or an authorized distributor for claims arising during the Warranty Period. Sterisil® reserves the right to repair or replace, in its discretion, any product that may exhibit a defect during the Warranty Period. Please note that the bladder tanks need to be replaced approximately every 2 years
See page 14 of the Operators Manual for warranty details.
Specifications:
Space Requirements:
Electrical Requirements:
Plumbing Requirements:
- Size: 20”W x 18”H x 5.5”D
- Weight dry: 22 lbs
- Weight wet: 24 lbs
- Source water temperature: 45–100°F, 7–38 °C
- Source TDS: 0–500ppm
- Source pressure: 65–85psi / 4.5–6bar
- Max serviceable chairs: 200, subject to water usage and facility
- Produces up to 190L per day of RO or DI water
Space Requirements:
- Minimum mounting space:
- Hinged: 20”W x 22”H x 7”D
- Slide: 38”W x 22”H x 6.5”D
- Recommended height is to place the top of the system 64” AFF.
- Booster pump and pre-filter:
- Booster pump: 7”H x 4”D (Recommended if source PSI<65)
- Pre-filter: 12”H x 5”D (Recommended)
- Tank dimensions:
- 4G: 15”H x 12”D
- 10G: 21”H x 13”D
- 14G: 23”H x 15.25”
Electrical Requirements:
- Electrical Outlets (1) Outlet 110V AC, 3 amp, GFCI, within 3' from system
Plumbing Requirements:
- Use of 1/4” OD LLDPE or PEX tubing.
- Standard sink or floor drain within 20’ of the system and not above height of system.
- Valve controlled tee off the municipal source for ¼” tubing within 10’ of the system.
- Backflow prevention in accordance with state and local ordinances should be installed. Not provided
Limited Warranty: 12 months Sterisil® warrants the Sterisil® Ac+ System to be free from defects in parts, materials, manufacturing, or labor for a period of one year after the device is placed in service by the end user (the “Warranty P
This Limited Warranty does not include user replaceable parts required for routine maintenance of the product or damage resulting from abuse or neglect of the product, and covers only use of the product for its intended purpose, and not for
End users should contact Sterisil® or an authorized distributor for claims arising during the Warranty Period.
Sterisil® reserves the right to repair or replace, in its discretion, any product that may exhibit a defect during the Warranty Period.
Please note that the bladder tanks need to be replaced approximately every 2 years See page 14 of the Operators Manual for warranty details.
