VistaPure V3000 Replacement Filters (Position 1 - 5), 1/ea
Couldn't load pickup availability
Maintaining the VistaPure system requires periodic water-quality checks using the provided TDS meters and filter replacement when indicated.
All VistaPure filters are made from quality materials for maximum service life.
Each filter is sold individually.
- Perform monthly water-quality checks using the TDS meters.
- Position 1: Pre-Filter: Replace annually. Replace more frequently in areas with high sediment levels.
- Positions 2 and 3: Deionization Filters: Expected service life ranges from four months to three years. Replace when the TDS meter reads 4 ppm or higher.
- Position 4: Hyperfiltration Element: Replace every three to five years or when the TDS meter in the “IN” position reads more than 10% of the municipal water-supply TDS.
- Position 5: Polishing Filter: Replace at least annually.
- Use manufacturer-specified filters for optimal system performance and support.
Specifications for the filters used in the Vista Pure water purification system:
Pre-Filter:
- Purpose: Removes chlorine and particulate matter from the source water
- Change Frequency: At least once per year; more frequently in areas with high sediment or debris
- Function: Protects the hyperfiltration element
Hyperfiltration Element:
- Purpose: Removes the majority of total dissolved solids (TDS) from the water
- Change Frequency: Every 3-5 years, depending on water usage, quality, and pressure
- Function: Leaves a small amount of TDS to prevent water from becoming corrosive to dental equipment
Deionization Filters:
- Purpose: Removes the remaining TDS to produce distilled quality water
- Change Frequency: Every 4 months to 3 years, depending on water usage and quality
- Change Indicator: Replace when the system-mounted TDS meter shows ≥ 4 parts per million (ppm) of TDS
- Function: Ensures water is suitable for autoclaves and other sensitive dental equipment
Polishing Filter:
- Purpose: Further refines water quality, ensuring optimal purity
- Change Frequency: At least once per year
General Maintenance:
- Regular Checks: Monthly water quality checks with TDS meters
- Filter Replacement: Use only manufacturer-specified filters for best performance and to maintain warranty support
These specifications ensure that the Vista Pure system provides high-quality, non-corrosive water suitable for various dental applications.
Q What does the pre-filter do?
A. The pre-filter removes chlorine and particulate matter from the source water, protecting the hyperfiltration element from damage and fouling.
Q How often should the pre-filter be replaced?
A. The pre-filter should be replaced at least once per year. In areas with high sediment or debris, more frequent changes may be necessary.
Q What is the function of the hyperfiltration element?
A The hyperfiltration element removes the majority of total dissolved solids (TDS) from the water while leaving a small amount to prevent corrosion in dental equipment.
Q How long does the hyperfiltration element last?
A The hyperfiltration element typically lasts 3-5 years, depending on the volume of usage, water quality, and pressure conditions.
Q What do the deionization filters do?
A The deionization filters further purify the water by removing the remaining TDS, producing distilled quality water suitable for autoclaves and sensitive dental equipment.
Q When should the deionization filters be replaced?
A The deionization filters should be replaced every 4 months to 3 years, depending on usage and water quality. Replacement is needed when the system-mounted TDS meter shows ≥ 4 parts per million (ppm) of TDS.
Q What is the role of the polishing filter?
A The polishing filter enhances the final water quality by providing additional filtration.
Q How often should the polishing filter be replaced?
A The polishing filter should be replaced annually.
Q How can I monitor the quality of the water produced by the system?
A Water quality should be checked monthly using the provided TDS meters. Ensure water is running through the system when taking measurements for accurate results.
Q Why is it important to use manufacturer-specified filters?
A Using manufacturer-specified filters ensures optimal performance of the system and maintains the ability to provide customer service and warranty support.
Q What should I do if the TDS meter shows high readings?
A If the system-mounted TDS meter shows readings equal to or greater than 4 ppm for the deionization filters, or exceeds 10% of the TDS of the municipal water supply for the hyperfiltration element, it is time to replace the respective filters.
Q Why is it important to use manufacturer-specified filters?
A Using manufacturer-specified filters ensures optimal performance of the system and maintains the ability to provide customer service and warranty support.
|
|
Item # | Description | Mfr | Qty/ea | Price | View |
|
A-NVP-R3251 | VistaPure Prefilter Element (Position #1) | R3250 | 1/Filter | $111.00 | Add To Cart |
|
A-NVP-R3252 | VistaPure Deionization Filter (Position #2) | R3252 | 1/Filter | $161.00 | Add To Cart |
|
A-NVP-R3253 | VistaPure Deionization Filter (Position #3) | R3253 | 1/Filter | $161.00 | Add To Cart |
|
A-NVP-R3254 | VistaPure Hyperfiltration Element (Position #4) | R3254 | 1/Filter | $315.00 | Add To Cart |
|
A-NVP-R3255 | VistaPure Polishing Filter (Position #5) | R3255 | 1/Filter | $111.00 | Add To Cart |
Accessories
