SteriCheck Digital Incubator Starter Kit with 10 Hour Biological Indicators

• FDA Cleared
• Onboard Biological Indicator Ampule Crusher.
• 13 Incubation slots allow you to process 13 BIs' at one time.- great if you have multiple autoclaves!
• Ease of use - LED Display for Easy Reading
• Adjustable Temperature up to 100°C
• Simultaneous display of Set/Actual Time and Temperature
• 3D digital Wheel adjustment of time and temperature
• Excellent temperature control and accuracy
• Program up to 5 Pre-set Time and Temperature Setting
• Compact and light-weight
• Clear Plastic Lid to keep wells clean while not in use
• Quick Heating Time
• Audible alarm sounds after time is completed
• For instructions: See Technical spec's

Type: Readers & Incubators

Starter-Kit:
(1)SteriCheck Digital Incubator
(1)Box of 100 of the biological indicators (enough to do 50 tests, or 50 weekly tests).
(1)Steripen Sterilizer Chemical Indicator Pen, 1/box

SteriCheck Digital Incubator with biological indicator
Basic instructions are:

• Make sure the incubator is operating at 60°C.
• Place one BI into the autoclave and run it as usual.
• Once it's completed, remove and set aside for 10 mins to let it cool.
• Place it into the oblong hole inside the incubator, and push it sideways to activate.
• Place that into one of the holes in the incubator.
• Add a Control test BI – activate it in the oblong hole, label it “C” for control, and place it into another hole in the incubator.
• Push the blue button to start the timer (10-hours).
• Remove both after 10 hours. The Control test should be yellow, showing there is spore activity. The Sterilizer test BI should remain purple – showing no sign of life.
• Report everything into the logbook provided.

This system is easy to use and is FDA-approved.