Refurbished Steris Century V160 Steam Sterilizer
WARRANTY: 1 year parts and labor, 6 months on PM Parts, 5 warranty years on pressure vessel
Steris V160 Steam Sterilizers are designed for fast, efficient sterilization of heat and water-resistant materials with the same capabilities as a gravity sterilizer. The V160 pre-vacuum sterilizer is equipped with pre-vac, gravity, flash, express, leak test, and daily air removal test cycles. With a 26″ x 37.5″ x 60″ chamber, the V160 sterilizer provides enough space fit all of your equipment and sterilize with speed and reputable quality in mind.
WARRANTY: 1 year parts and labor, 6 months on PM Parts, 5 warranty years on pressure vessel
Steris V160 Steam Sterilizers are designed for fast, efficient sterilization of heat and water-resistant materials with the same capabilities as a gravity sterilizer. The V160 pre-vacuum sterilizer is equipped with pre-vac, gravity, flash, express, leak test, and daily air removal test cycles. With a 26″ x 37.5″ x 60″ chamber, the V160 sterilizer provides enough space fit all of your equipment and sterilize with speed and reputable quality in mind.
Features:
- Florescent display for easy reading
- Ink on paper impact printer
- 26″ x 37.5″ x 60″ chamber
- Pre-vacuum Steam Sterilizer
- Fast & efficient
- Emergency manual exhaust valve
- Non-lubricated, steam-activated door seal
- Help screens for programming/troubleshooting alarm conditions
- Communication interface compatibility w/ most PC devices
- Electronic water conservation valve
- Optional Stainless steel side panels available.
1 Year Parts & Labor Warranty, 6 months on PM Parts, 5 warranty years on pressure vessel. Standard Preventative Maintenance must be completed while unit is under warranty.
Additional Options: Cabinet Package, Loading Cart, Integral Steam Generator, Water Filtration Options
Steris Amsco Century V160 Medium Steam Sterilizer Options:
| Chamber Size | Doors | Door Configurations | Mounting | Steam Source | Vacuum Pump Electric Service | Accessories |
|
26" x 37.5" x 36" (660 x 950 x 910 mm) |
Single |
Hinged
or Horizontal Sliding |
Cabinet
Enclosed (Freestanding)
or Recessed |
Building Steam |
208/240
VAC, 60 Hz, 3-Phase, 6A per phase
or 480 VAC, 60 Hz, 3-Phase, 3A per phase |
Loading
Car, Transfer Carriage, and Track Assembly
Chamber Rack and Shelf Seismic Tie-Down Kit |
|
26" x
37.5" x 48"
(660 x 950 x 1220 mm) |
Single |
Hinged
or Horizontal Sliding |
Cabinet
Enclosed (Freestanding)
or Recessed |
Building Steam |
208/240 VAC, 60 Hz, 3-Phase, 6A per phase or 480 VAC, 60 Hz, 3-Phase, 3A per phase |
Loading
Car, Transfer Carriage, and Track Assembly
Seismic Tie-Down Kit |
| Double |
Hinged
or Horizontal Sliding |
Recessed
through One Wall
or Two Walls |
Building Steam |
208/240
VAC, 60 Hz, 3-Phase, 6A per phase
or 480 VAC, 60 Hz, 3-Phase, 3A per phase |
Loading
Car, Transfer Carriage, and Track Assembly
Seismic Tie-Down Kit |
|
|
26" x
37.5" x 60"
(660 x 950 x 1520 mm) |
Single |
Hinged
or Horizontal Sliding |
Cabinet
Enclosed (Freestanding)
or Recessed |
Building Steam |
208/240
VAC, 60 Hz, 3-Phase, 6A per phase
or 480 VAC, 60 Hz, 3-Phase, 3A per phase |
Loading
Car, Transfer Carriage, Chamber Track Assembly
Seismic Tie-Down Kit |
| Double |
Hinged
or Horizontal Sliding |
Recessed
through One Wall
or Two Walls |
Building Steam |
208/240
VAC, 60 Hz, 3-Phase, 6A per phase
or 480 VAC, 60 Hz, 3-Phase, 3A per phase |
Loading
Car, Transfer Carriage, Chamber Track Assembly
Seismic Tie-Down Kit |
All processing cycles factory programmed into the sterilizer control have been validated to AAMI ST8.
Prevacuum configuration sterilizers are factory programmed with the following cycles:
270°F (132°C) Prevacuum (with either 5-minute or 20-minute dry phases) - For efficient, high volume processing of heat- and moisture-stable materials, such as fabrics and wrapped hard goods. This process incorporates a series of pressure/vacuum pulses to condition the load prior to sterilization. Sterilize temperature: 270°F (132°C) - Sterilize time: 4 minutes - Dry time: 5 minutes or 20 minutes
Gravity, Liquid, 250°F (121°C) - For sterilizing fabrics, Sterilize temperature: 250°F (121°C) - Sterilize time: 30 minutes - Dry time: 15 minutes (Note: A gravity cycle, adjusted to 270°F for 25-minute sterilize exposure time, can be used for processing fabric packs.)
270°F (132°) Gravity Cycle: For sterilizing hard goods. Sterilize temperature: 270°F (132°C) - Sterilize time: 15 minutes - Dry time: 30 minutes (Note: 270°F temperature must be set by the user)
270°F (132°C) Prevacuum (with either 5-minute or 20-minute dry phases) - For efficient, high volume processing of heat- and moisture-stable materials, such as fabrics and wrapped hard goods. This process incorporates a series of pressure/vacuum pulses to condition the load prior to sterilization. Sterilize temperature: 270°F (132°C) - Sterilize time: 4 minutes - Dry time: 5 minutes or 20 minutes
Gravity, Liquid, 250°F (121°C) - For sterilizing fabrics, Sterilize temperature: 250°F (121°C) - Sterilize time: 30 minutes - Dry time: 15 minutes (Note: A gravity cycle, adjusted to 270°F for 25-minute sterilize exposure time, can be used for processing fabric packs.)
270°F (132°) Gravity Cycle: For sterilizing hard goods. Sterilize temperature: 270°F (132°C) - Sterilize time: 15 minutes - Dry time: 30 minutes (Note: 270°F temperature must be set by the user)
SFPP configuration sterilizers are factory programmed with the following cycles: WRAP/SFPP, SFPP, Prevacuum, Gravity, Liquid and Test Cycles.
Sterilize temperature: 270°F (132°C) - Sterilize time: 4 minutes - Dry time: 20 minutes
WRAP/SFPP Cycle: For efficient, high-volume processing of heat- and moisture-stable materials, such as double wrapped instrument trays. This process incorporates a series of steam flushes and pressure pulses at pressures above atmospheric levels to condition load prior to sterilization. - Sterilize temperature: 270°F (132°C) - Sterilize time: 4 minutes - Dry time: 20 minutes
Liquid Cycle: This cycle is used for sterilizing liquids in borosilicate containers with vented closures. » Sterilize temperature: 250°F (121°C) - Factory programmed sterilize time: 45 minutes - Dry time: not applicable
275°F (135°C) Prevacuum Cycle: This cycle is used for efficient, high-volume processing of heat- and moisturestable materials in double-wrapped instrument trays. This process incorporates a series of pressure/vacuum pulses to condition the load prior to sterilization. » Sterilize temperature: 275°F (135°C) » Sterilize time: 3 minutes » Dry time: 16 minutes
Utility Requirements
Steam
• 1” NPT
• 50 to 80 psig (3.5 – 5.6 bar) dynamic
• 97% - 100% vapor quality
Drain
• 2” ODT drain terminal
Electrical - Controls
• 120 Volt, 50/60 Hz, 1-phase, 2.0 Amp
Electrical–Vacuum Pump
• 208/240 Volt, 50/60 Hz, 3-phase, 6 Amp per phase.
Electrical–Vacuum Pump
• 208/240 Volt, 50/60 Hz, 3-phase, 6 Amp per phase.
• 480 Volt, 50/60 Hz, 3-phase, 3 Amp per phase.
Sterilizer Feed Water
1" NPT, 20 to 50 psig (1.4 to 3.5 bar) dynamic. Water is used for vacuum pump, heat exchanger and trap cooling.
Interior Chamber Dimensions:
208/240 VAC, 60 Hz, 3-Phase, 6A per phase
480 VAC, 60 Hz, 3-Phase, 3A per phase
- 26" x 37.5" x 36" (660 x 950 x 910 mm)
- 26" x 37.5" x 48" (660 x 950 x 1220 mm)
- 26" x 37.5" x 60" (660 x 950 x 1520 mm)
Steris Amsco Century V160 Sterilizer Technical Brochure
Steris Amsco Century Medium Brochure
Steris Amsco Century Medium Steam Sterilizers Cycle Time
Standards:
Each sterilizer meets applicable requirements of the following listings and standards, and carries the appropriate symbols:
• Underwriters Laboratories (UL) Standard 61010-1 as certified by ETL Testing Laboratories, Inc.
• Canadian Standards Association (CSA) Standard C22.2 No. 1010.
• ASME Code, Section VIII, Division 1 for unfired pressure vessels. The pressure vessel is so stamped; ASME Form U-1 is furnished. Shell and door are designed for maximum allowable working pressure of 45 psig (3.1 bar)
Read more about Steris
Not sure this is the right autoclave for you? Complete our Large Capacity Autoclave Questionnaire online to find the best match,
Steris Amsco Century Medium Brochure
Steris Amsco Century Medium Steam Sterilizers Cycle Time
Standards:
Each sterilizer meets applicable requirements of the following listings and standards, and carries the appropriate symbols:
• Underwriters Laboratories (UL) Standard 61010-1 as certified by ETL Testing Laboratories, Inc.
• Canadian Standards Association (CSA) Standard C22.2 No. 1010.
• ASME Code, Section VIII, Division 1 for unfired pressure vessels. The pressure vessel is so stamped; ASME Form U-1 is furnished. Shell and door are designed for maximum allowable working pressure of 45 psig (3.1 bar)
Read more about Steris
Not sure this is the right autoclave for you? Complete our Large Capacity Autoclave Questionnaire online to find the best match,
Refurbished Steris Century V160 Steam Sterilizer WARRANTY: 1 year parts and labor, 6 months on PM Parts, 5 warranty years on pressure vessel Steris V160 Steam Sterilizers are designed for fast, efficient sterilization of heat and water-resistant materials with the same capabilities as a gravity sterilizer.
1 Year Parts & Labor Warranty, 6 months on PM Parts, 5 warranty years on pressure vessel.
Standard Preventative Maintenance must be completed while unit is under warranty.
Frequently Asked Questions
Shoot our team an email & we’ll get back to you ASAP
How do I look up disinfectant on List N?
How do I look up disinfectant on List N?
First, find the product registration number. This can be found on the product label or safety data sheet. Duraline posts most registrations in the Product Description field of the product page in our website. Second, go to the epa.gov website: https://cfpub.epa.gov/giwiz/disinfectants/index.c... and enter the first 2 parts of the registration number and click enter.
My product has 3 parts on the registration number and I can't find all 3 on the approved website for List N. Why?
My product has 3 parts on the registration number and I can't find all 3 on the approved website for List N. Why?
The first 2 parts of the EPA Registration Number are the primary numbers and represent the primary registration. Since different companies sell products with the same chemical composition and efficiency, only 1 brand or product name receives the primary number. The third part represents the distributor of the primary registration and is still on List N and is proven effective against SARS-CoV-2 (COVID-19).
I can't find Swovo disinfectant wipes on List N. Where is it?
I can't find Swovo disinfectant wipes on List N. Where is it?
The EPA Registration number for Swovo is 59894-10-98425
To find this on the epa.gov website, you only need to enter the first 2 parts of this number, "59894-10"
This primary registration number is on the list, and so it is approved! See screenshot below.