SteriCheck Digital Incubator Starter Kit with 10 Hour Biological Indicators

Starter-Kit:
(1)SteriCheck Digital Incubator
(1)Box of 25 of the biological indicators (enough to do 12 tests – or 12 monthly tests for the year).
(1)Steripen Sterilizer Chemical Indicator Pen, 1/box

SteriCheck Digital Incubator with biological indicator
Basic instructions are:

• Make sure incubator is operating at 60
  
• Place one BI into the autoclave and run it as usual
  
• Once its completed, remove and set aside for 10 mins to let it cool
  
• Place into the oblong hole inside the incubator, and push it sideways to activate
  
• Place that into one of the holes in the incubator
  
• Add a Control test BI – activate it in the oblong hole, label it “C” for control, and place into another hole in the incubator
  
• Push the blue button to start timer (10-hours
  
• Remove both after 10 hours. The Control test should be yellow showing there is spore activity. The Sterilizer test BI should remain purple – showing no sign of lif
  
• Report everything into the logbook provided.

This system is easy to use and is FDA-approved.

• shake for 10 seconds.
• Open cap and press down slightly on paper and start writing until magenta-colored ink flows to tip of pen.
• Cap after use.
• Shake briefly before next use. Always cap when done.
• Ink changes color from magenta-to-black if exposed to steam sterilization.