Setting Up Your Auto-reader:
1. Place MiniBio Auto-reader on a stable surface, away from extreme conditions.
2. Ensure a 10 cm space from the closest wall.
3. Connect to a secure electrical outlet.
4. Avoid liquid exposure; if spilled, disconnect and dry immediately.
5. Confirm all reading positions are empty before turning on.
Using Your Auto-reader:
1. Power on by connecting the AC plug and jack.
2. Press temperature button for 3 seconds, select desired temperature.
3. Wait for temperature stability indicator to stop blinking.
4. Choose incubation time, place the SCBI, and incubation begins automatically.
5. Wait for completion; green light for negative, red for positive. Press alarm to cancel (if needed).
6. Do not remove SCBI until the result ticket is printed.
Disposal:
Dispose of SCBIs following your country's waste-disposal guidelines.
Connectivity:
Connect MiniBio Auto-reader to a PC via USB for Bionova Traceability Software. Refer to the User’s Manual for details.
Compatibility and Programs:
Explore available incubation programs in the Bionova MiniBio Auto-reader User’s Manual or Compatibility Matrix.